Subaru 2011 Outback 3.6R Cars

User Manual - Page 298

For 2011 OUTBACK 3.6R.

PDF File Manual, 454 pages, Read Online | Download pdf file

2011 OUTBACK 3.6R photo
Loading ...
Loading ...
Loading ...
Black plate (305,1)
Model "A2470BE-B" EDITED: 2010/ 9/ 21
vehicle speed when the but ton is
pressed and the speed last time you
set is less than 4.4 km/h, the vehicle
speed will be lowered by 1 km/h. This
occurs because the cruise control
system regards this operation as that
intended to decrease the vehicle
speed.
! To decrease the speed (by the
RES/SET switch)
Press the RES/SET switch to the SET
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.S.-spec. models
When the difference between the actual
vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can
be lowered 1 mph (1.6 km/h) each time by
pressing the RES/SET switch to the
SET side quickly.
Canada-spec. models
When the difference between the actual
vehicle speed and the set speed is less
than 4.4 km/h, the set speed can be
lowered 1 km/h each time by pressing the
RE S/SET switch to the SET side
quickly.
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed , press the RES/SET
switch to the SET side once. Now the
desired speed is set and the vehicle will
keep running at that speed without de-
pressing the accelerator pedal.
& Cruise control indicator light
The cruise control indicator light illumi-
nates when the ignition switch is turned to
the ON position and turns off after
approximately 3 seconds.
The light illuminates when the CRUISE
main switch is pressed.
NOTE
. If y ou press the CRUISE main
switch button while turning the ignition
switch ON, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
Acc or LOCK position, and then
turn it again to the ON position.
. If this indicator light and the CHECK
Starting and operating 7-41
CONTINUED
7
Loading ...
Loading ...
Loading ...