Loading ...
Loading ...
Loading ...
18
1. Remove door from dryer
2. Move the door strike
Using a Torx
®†
T25 screwdriver, remove the 2 screws securing
the door strike to the door frame of the dryer. Rotate the
strike 180° and attach to the opposite side of dryer door
frame, as shown.
3.
Remove inner door from outer door
Position the door with the inside of the door facing up. Using
a Phillips screwdriver, remove the 10 screws securing the inner
door to the outer door. Lift off the inner door and set aside.
IMPORTANT: If the protective lm has not yet been removed
from the dryer, peel the lm from the dryer door before
proceeding.
Using a Torx
® †
T25 screwdriver, remove the 4 screws securing
the door hinge to the dryer and lift up and out to remove the
door. Place the door on a soft towel or other non-scratch
surface. Reinstall the 4 screws in the holes.
4. Remove outer window assembly
from trim ring
Using a Phillips screwdriver, remove the 2 screws from the outer
window retainer and rotate the outer window assembly clockwise
until the square notches line up with the 4 tabs on the trim ring
indicated with arrows in the gure A above. Then lift out the outer
window and retainer up and off the trim ring and set aside (B).
A
B
† ® TORX is a registered trademark of Saturn Fasteners, Inc.
Loading ...
Loading ...