KD-43XG7073 User Manual

Loading ...

D:\LIFA\@ Jobs\SG\SY19_SG_EU_RG_121\Final\Full-set

Data\4748137121\4748137121\4748137121_01GB\4748137121_01GB.fm

master page: Right

KD-65XG70xx / 55XG70xx / 49XG70xx / 43XG70xx

4-748-137-12(1)

• Install the TV so that the TV’s Table-Top Stand does not protrude

out from the TV stand (not supplied). If the Table-Top Stand

protrudes out from the TV stand, it may cause TV set to topple

over, fall down, and cause personal injury or damage to the TV.

• Only qualified service personnel should carry out wall-mount

installations.

• For safety reasons, it is strongly recommended that you use

Sony accessories, including:

 Wall-Mount Bracket: SU-WL450

• Be sure to use the screws supplied with the Wall-Mount Bracket

when attaching the Wall-Mount Bracket to the TV set. The

supplied screws are designed as indicated by illustration when

measured from the attaching surface of the Wall-Mount Bracket.

The diameter and length of the screws differ depending on the

Wall-Mount Bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

Transporting

• Before transporting the TV set, disconnect all cables.

• Two or three people are needed to transport a large TV set.

• When transporting the TV set by hand, hold it as shown below.

Do not put stress on the LCD panel and the frame around the

screen.

• When lifting or moving the TV set, hold it firmly from the

bottom.

• When transporting the TV set, do not subject it to jolts or

excessive vibration.

• When transporting the TV set for repairs or when moving, pack

it using the original carton and packing material.

Topple prevention

KD-65XG70xx / 55XG70xx

KD-49XG70xx / 43XG70xx

Screw (M6)

Wall-Mount Bracket

TV’s rear cover

8 mm – 12 mm

M6 screw (not supplied)

Cord (not supplied)

Screw (not

supplied)

1.5 N·m

{15 kgf·cm}