Loading ...
Loading ...
Loading ...
Assembling the Equipment
13
Attaching the Stabilizers (EFX 447 and 425
Models Only)
This procedure applies to EFX 447 and 425 models only.
To attach the stabilizers:
1. Insert a clamp into each stabilizer and secure it loosely with two
buttonhead screws.
Figure 22: Location of clamp in stabilizer
2. Screw an adjustable foot into each stabilizer.
Note: Make sure the nut rests against the stabilizer.
Figure 23: Adjustable foot attachment
3. For easier access to the base mounts, lift the front of the EFX off the floor
and place a wedge of packaging cardboard beneath its base.
Figure 24: Wedge packaging beneath base frame
4. Have your assistant hold the stabilizer (with a cable protruding from both
ends) next to the movable arm assembly and base frame while you connect
the base cable. You will hear a click when the cable is properly attached.
Store excess cable in the stabilizer frame.
Figure 25: Base cable connection
Loading ...
Loading ...
Loading ...