Loading ...
Loading ...
Loading ...
5
General description (fig. 1)
A Temperature control dial
B Steam control dial
O = no steam
1 = minimum steam output
4 = maximum steam output
C Spray button T (press)
D Spray nozzle
E Shot-of-steam button U (press)
F Filling opening with lid for easy filling and ironing without
spilling water
G Soleplate
H Temperature pilot light (orange) (only types HI 414 - 434)
I Self-clean button for self-cleaning or descaling
J Water reservoir
K Cord storage
L Type plate
M Filling jug
N Cord clip
O Auto-stop pilot light (red) (only type HI 444)
P Temperature pilot light (orange) (only type HI 444)
Q Temperature indicator showing the temperature setting selected
with the temperature control dial (A)
Filling with water (for steam-ironing and spraying)
• Use tap water the first time you fill the iron.
• After the first time, you can still use tap water. However, if the water is
very hard (harder than 17° DH / 21° Clarke), it is advisable to use
demineralised or distilled water, which can be obtained from e.g.
chemists.
• Unplug the iron before filling it. Set the steam control (B) to position O
(= no steam).
• Open the lid of the filling opening (fig. 2).
• Fill the filling jug (M) with water (max. 240 ml). Hold the iron in a tilted
position and pour the water into the filling opening (fig. 3).
• Close the lid of the filling opening (fig. 4).
Loading ...
Loading ...
Loading ...