Loading ...
Loading ...
Loading ...
45
Using the Menus
If you have missed the Initial Setup when you first connected the TV or if you want to scan all receivable
channels, you can run the Initial Setup. Follow the instructions on the screen. Settings such as picture and
sound adjustments will not be affected by this Initial Setup.
Light Sensor Enables the automatic picture (screen) brightness control. Light Sensor measures the
room brightness which allows the TV to automatically adjust the backlight brightness
based on the picture settings and the ambient room light conditions.
~
• Be sure not to put anything around the sensor, as its function may be affected (see
page 25).
• In low light the range of the backlight control is reduced when Light Sensor is set to
On.
PC Power
Management
On Automatically enters to standby mode when there is no signal input
for more than 30 seconds. The STANDBY LED on the front panel
will illuminate when PC Power Management switches the TV to
standby mode.
Off Turns off PC Power Management.
~
• To bring the TV out of standby mode and recover TV features, press TV POWER on the
remote control.
• PC Power Management is not VESA-compliant.
Logo Illumination Select to illuminate the Sony logo on the front panel of the TV. Select On or Off.
Initial Setup
~
• Favorites list will be cleared each time you run the Initial Setup.
Loading ...
Loading ...
Loading ...