Loading ...
Loading ...
Loading ...
6
IMPORTANT OPERATION INSTRUCTIONS
• NEVER operate this treadmill without reading and completely understanding the results of any operational
change you request from the computer.
• Understand that changes in speed and incline do not occur immediately. Set your desired speed on the com-
puter console and release the adjustment key. The computer will obey the command gradually.
• NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that
could damage treadmill components.
• Use caution while participating in other activities while walking on your treadmill; such as watching television,
reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt,
which may result in serious injury.
• NEVER mount or dismount the treadmill while the belt is moving. XTERRA Fitness treadmills start with at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during
slow acceleration is proper after you have learned to operate the unit.
• ALWAYS hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
SAFETY TETHER CORD
A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is
for your safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop tread-
belt movement.
To Use:
1. Place the magnet into position on the round portion of the console control head. Your treadmill will not start
and operate without this. Removing the magnet also secures the treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong
enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make
certain it does not come o. Be familiar with its function and limitations. The treadmill will stop, depending on
speed, with a one to two step coast anytime the magnet is pulled o the console.
REMOVE TETHER CORD AFTER USE TO PREVENT UNAUTHORIZED TREADMILL OPERATION.
properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
Loading ...
Loading ...
Loading ...