Loading ...
Loading ...
Loading ...
30
CLEANING THE DUST BIN
not covered by warranty.
If you initiate cleaning, with no filters fitted to the dust bin or Filter Cover not assembled,
a voice message will be announced which says "Please check if the dust bin is installed
with the filter."
cleaning the dust bin so that it closes easily and accurately.
Tip
1. Open the dust bin compartment cover by
Cleaner.
2. Grab the handle of the dust bin and pull it
upward.
3. Pull the hook on the left of Filter Cover on the
rear of Dust Bin to separate the filter and the
sponge.
※
Note that separating the filter may result in
dust dropping.
※
Refer to p.31 when cleaning the Dust Bin
Filter.
4. Lift the dust bin lid upward while pressing the
separation button on the dust bin.
5. Empty the dust bin and clean it with a cleaning
brush or under running water.
6. After cleaning with water, completely dry the
dust bin in a well-ventilated area out of the
direct sunlight.
7. When reassembling or fitting the cleaned Dust
Bin, close the lid and put in the Sponge and
EPA Filter.
※
Refer to p.31 for detailed assembly guides.
8. Put the dust bin into the Robot Cleaner and
close the dust bin compartment cover.
If the dust bin is full, suction power can be reduced. Clean the dust bin before or after each cleaning
session. Clean the dust bin using the following sequence:
Loading ...
Loading ...
Loading ...