Loading ...
Loading ...
Loading ...
16
Safety symbols
The purpose of safety symbols is to bring your attention
to possible dangers. The safety symbols and explanations
require your careful attention and full understanding. The
symbol warnings do not, by themselves, eliminate any
danger. The instructions and warnings are not substitute
to accidents prevention measures.
pressure from being exceeded. If the lever on the trigger
gun is released the pressure switch turns the pump off
and, the high-pressure jet stops. If the lever is pulled the
pump is turned on again.
Flow monitors
DO NOT alter the original diameter of the spray head
nozzle - HAZARDOUS ALTERATION OF OPERATING
PERFORMANCE.
Attention!
Connecting to mains power supply.
Connecting the high pressure washer to a supply system,
the max allowed impedance is 0.40OHM. Consult with
the supply authority that the equipment is connected only
to a supply of that impedance or less.
SYMBOLS
PRODUCT SAFETY WARNINGS
Loading ...
Loading ...
Loading ...