Loading ...
Loading ...
Loading ...
OPERATING YOUR REEL MOWER
15
MOWER BLADE ADJUSTMENTS (See Figure 13)
W A R N I N G
BLADES ARE EXTREMELY SHARP. TO AVOID INJURY, DO NOT TOUCH BLADES WHEN
MAKING ADJUSTMENTS.
NOTE: Blades are factory adjusted.
• Misalignment can occur, often caused by blades being too loose or too tight. This can cause
an uneven cut or difculty pushing the mower.
• Each end of the cutting bar is adjusted separately.
• To move the cutting bar closer to the blades turn the adjustment screw clockwise. To move
the cutting bar away from the blades turn the adjustment screw counterclockwise.
C A U T I O N
Αdjusting the screws for blade adjustments is a very sensitive procedure. A sixteenth of a turn is
considered a major adjustment. Βefore tightening one adjustment screw, make sure to loosen
the opposite screw an equal amount.
Fig. 13
The Height adjustment knob
Loading ...
Loading ...
Loading ...