Loading ...
Loading ...
Loading ...
6
Installing the Oven Racks
WARNING
The oven racks become hot when the oven is in use.
The oven has seven levels for positioning the racks.
Installing a Standard Oven Rack
1. Insert the end of the rack with the safety notches
into the oven first.
2. Attach both sides of the rack to the rack supports
in the oven as shown below.
3. Slide the rack in, and tilt it up so the safety
catches clear the ends of the rack supports.
4. Push the rack the rest of the way in.
To remove the rack:
1. Grasp the rack with both hands, and pull gently
until it stops.
2. Tilt the rack up 6 inches (to release the safety
catches), and pull it out.
Installing a GlideRack™ Oven Rack
These special racks let you effortlessly move heavy
cookware in/out of the oven.
1. Extend the rack guides completely (see below).
2. Align the left and right safety clips on the back of
the guides with the oven-rack supports as shown.
3. Insert the rack in the oven, sliding its supports
between the rear safety clips as shown. Tilt the
front up slightly until the front safety clips just
clear the front of the rack supports.
4. Lower the rack so the front of the rack support is
between the front safety clip and the rack stop.
5. Grasp the front-center of the rack, and pull. The
rack slides forward; the guides remain in place.
To remove a GlideRack oven rack:
1. Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
2. Lift up until the front safety clips just clear the
front of the oven rack supports. Continue to pull
out. Moving the end of the rack slightly, left to
right, as you pull, will make it easier to remove.
Setting Up the Range
Front of rack
Rack
support
Slide oven rack
supports into
slots on the rack
Safety notch
Front of
rack
Rack guides
(fully extended)
Lift front safety
clips over rack
supports
Slide rack
supports between
back safety clips
Rack
support
Back of
guide
Loading ...
Loading ...
Loading ...