Loading ...
Loading ...
Loading ...
PROGRAMME selector with "OFF" position
When the programme selector
is turned the display lights up to
show the settings for the
programme selected.
N.B. To switch the machine off,
turn the programme selector to
the “OFF” position.
Today, most detergents have been improved to wash efficiently at
lower temperatures, therefore we have set the default
temperature settings of each programme to a lower level, saving
electricity and reducing the carbon footprint of your machine.
You can select an high temperature by pressing the temperature
button.
Please refer to the programme guide for the maximum
temperature to which each programme can be set.
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be returned to the "OFF" position
at the end of each cycle or when starting a subsequent wash
cycle prior to the next programme being selected and started.
N
13
Buttons indicator light
These light up when the relevant buttons are pressed.
If an option is selected that is not compatible with the selected programme then the light on
the button first flashes and then goes off.
O
12
2) DOOR LIGHT
Once the START/PAUSE button has been pressed the light first flashes then stops flashing
and remains on until the end of the wash.
2 minutes after the end of the wash the light goes off to show that the door can now be
opened.
3) SPIN SPEED
Once the programme has been selected, the maximum spin speed allowed for that
programme appears on the display. Pressing the spin button will reduce the speed by 100
rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is
possible to omit the spin by pressing the spin button repeatedly.
4) DELAY START LIGHT
This flashes when delay start has been set.
5) WASH CYCLE TIME
When a programme is selected the display automatically shows the maximum cycle duration
for a full load, which can vary, depending on the options selected. Once the programme has
started you will be kept informed constantly of the time remaining to the end of the wash.The
appliance calculates the time to the end of the selected programme based upon a standard
loading, during the cycle, the appliance corrects the time to that applicable to the size and
composition of the load.
6)Kg DETECTOR Indicator
Available on Cotton and Synthetic cycles, during the first 4 minutes of the cycle the intelligent
sensor will weigh the laundry and adjust the cycle time, water and electricity consumption
accordingly.
7) STAIN LEVEL
Once the programme has been selected the indicator light will automatically show the stain
level set for that programme. Selecting a different stain level the relevant indicator will light
up.
“STAIN LEVEL” button
By selecting this button (active only on COTTON and MIXED FIBRES programmes) there is a
choice of 3 levels of wash intensity, depending on how much the fabrics are soiled.
Once the programme has been selected the indicator light will automatically show the stain level
set for that programme. Selecting a different stain level the relevant indicator will light up. For
example: Using this button on the Rapid Wash cycle will enable you to select either a 14, 30 or 44
minute wash cycle.
M
Loading ...
Loading ...
Loading ...