Loading ...
Loading ...
Loading ...
11
Installation of CO
2
Cylinder Holder
Install the metal holder provided onto the 4 studs located on the exterior back wall. Align the holes in
the holder with the studs and push down firmly. (See Figure 1)
Installation of CO
2
Cylinder
Install your fully charged cylinder into the holder stand.
Figure 1
Installation of CO
2
Regulator
Attach the CO
2
regulator to the cylinder by turning the regulator nut
onto the cylinder valve, making sure washer is securely inserted
into connecting nut. Tighten snug using an adjustable wrench (not
supplied) and assure there are no leaks. (See Figure 2)
Figure 2
Installation of the Keg Coupler
Insert the keg coupler provided into the locking neck of the beer
keg and turn it clockwise to lock into position, making sure the keg
coupler is in the closed position. (See Figure 3)
Figure 3
Installation of the CO
2
Air Line Hose
Attach the end of the red hose to the hose connection on the keg coupler. Secure hose by using the
connector and make sure there are no leaks.
Installation of Protective Metal Plate
This plate should always be installed when the keg is in place to protect against unnecessary damage
to the floor of the cabinet liner.
CLOSED POSITION
Loading ...
Loading ...
Loading ...