Loading ...
Loading ...
Loading ...
Overview
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in the
button lights up.
4. Press the desired button 1 or 2 while the
LED is lit. The LED goes out.
Calling up settings
The stored position is called up automati-
cally.
Press the desired button 1 or 2.
The procedure stops when a seat adjust-
ment switch or one of the memory buttons
is pressed.
Once underway, adjustment of the seat po-
sition on the driver's side is disabled after a
short while.
Call up deactivated
After a brief period, calling up stored seat
positions is deactivated to save battery
power.
To reactivate calling up of a seat position:
– Open or close the door or tailgate.
– Press a button on the vehicle key.
– Press the Start/Stop button.
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is
more curved than the driver's side mirror.
The mirror setting is stored for the driver
profile currently in use. When the vehicle is
unlocked via the vehicle key, the position is
automatically retrieved if the function, refer
to page 76, is activated for this purpose.
The current exterior mirror position can be
stored using the memory function, refer to
page 92.
Safety information
Warning
Objects reflected in the mirror are closer
than they appear. The distance to the traf-
fic behind could be incorrectly estimated,
for instance while changing lanes. There is
a risk of accident. Estimate the distance to
the traffic behind by looking over your
shoulder.
Overview
1 Adjusting
2 Selecting a mirror, Automatic Curb Mon-
itor
3 Folding in and out
Seite 93
Seats, mirrors, and steering wheel CONTROLS
93
Online Edition for Part no. 01405A02CA2 - II/20
Loading ...
Loading ...
Loading ...