Loading ...
Loading ...
Loading ...
84
Refer also to “Cassette tapes/“Memory
Stick Duo”” section (p. 81).
You cannot play back a tape.
• Slide the POWER switch to turn on the
PLAY/EDIT lamp.
• Rewind the tape (p. 29).
You cannot play back in reverse
direction.
• Reverse playback is not possible with the
tape recorded in the HDV format.
Image data stored on a “Memory
Stick Duo” cannot be played back.
• Image data cannot be played back if you
have modified file names or folders, or
have edited the data on a computer (In this
case, the file name flashes). This is not a
malfunction (p. 94).
• Pictures recorded on other devices may not
be played back or may not appear in their
actual size. This is not a malfunction
(p. 94).
Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.
• Clean the head using the cleaning cassette
(optional) (p. 98).
You cannot hear the sound recorded
with 4CH MIC REC on another
camcorder.
• Adjust [ AUDIO MIX] (p. 58).
Fine patterns flicker, diagonal lines
look jagged.
• Adjust [SHARPNESS] to the (soften)
side (p. 45).
No sound or only a low sound is
heard.
• Turn up the volume (p. 29).
• Adjust [ AUDIO MIX] from the [ST2]
(additional sound) side until the sound is
heard appropriately (p. 58).
• If you are using an S VIDEO plug or
component video plug, make sure the red
and white plugs of the A/V connecting
cable are also connected (p. 35).
• Sounds cannot be recorded while shooting a
3 second-movie (approx.) using [SMTH
SLW REC].
The picture or sound breaks off.
• The tape was recorded in both the HDV and
DV formats. This is not a malfunction.
The movies freeze for a while, or the
sound breaks off.
• This occurs if the tape or video head is dirty
(p. 98).
• Use the Sony mini DV cassette.
“---” is displayed on the screen.
• The tape you are playing was recorded
without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or
noise cannot be read.
Noises appear and or is
displayed on the screen.
• The tape was recorded in a TV color system
other than that of your camcorder (NTSC).
This is not a malfunction (p. 91).
Date Search does not work correctly.
• Be sure to record more than 2 minutes after
the date changed. If one day’s recording is
too short, your camcorder may not
accurately find the point where the
recording date changes.
Playback
Troubleshooting (Continued)
Loading ...
Loading ...
Loading ...