Loading ...
Loading ...
Loading ...
10
6. Relocate the door to the designated position. Then screw the bottom hinge assembly on the left
designated position and tighten it after the door is leveled. (Fig. 1)
7. Remove the handle from the left side of the door and install it on the right side. (See below.)
ADJUSTING THE HEIGHT OF THE UNIT (Only for ALBV15)
The height of the ALBV15 can be increased by up to 3” by turning the adjustable legs. Once the desired
height has been achieved, the gap between the kick-plate and the floor can be covered by lowering a
hidden section of the kick-plate. See the next section for instructions.
ADJUSTING THE KICK-PLATE (Only for ALBV15)
The pre-fitted kick-plate of the appliance includes an adjustable
kick-plate section that is initially seated behind the upper section. In
order to adjust the kick-plate height, follow the instructions below:
1. Remove the screws
○
1 from both the top left- and top right-hand
sides of the kick-plate.
2. Loosen or remove the screws
○
2 from both the bottom left- and
bottom right-hand sides of the kick-plate. Failure to loosen the
bottom screws sufficiently may cause damage to the lower trim
when adjusting it.
3. Carefully guide the lower trim down until the desired height is achieved.
4. Reinsert screws and tighten them.
INSTALLING THE STAINLESS STEEL HANDLE
This appliance includes a stainless steel handle that is not required
to operate the unit. To install the handle, follow the instructions
below:
1. Remove the door gasket
○
2 on the side you wish to install the
handle - you can see two designated holes for handle
installation.
2. Install the handle
○
4 tightly as shown above with two screws
○
1 and flat washers
○
3 provided.
3. Replace the door gasket.
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between 60 and
90°F (16 - 32°C), although optimum performance occurs when the temperature range is 72 to 78ºF (23 -
26ºC). If the ambient temperature is above or below the recommended temperatures, the performance of
the unit may be affected. For example, placing your unit in extremely cold or hot conditions may cause
interior temperatures to fluctuate. The operating range of 36 - 43ºF (2 - 6ºC) may not be reached.
Loading ...
Loading ...
Loading ...