Loading ...
Loading ...
Loading ...
11
PREPARATION
If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of
the Montort set.
When you install the set using the wall mounting interface (optional parts), attach it carefully so it will
not drop.
1. Be sure to use screws and a wall mount that meet VESA standards.
2. Using screws longer than those recommended might damage the product.
3. Using screws that do not meet VESA standards might either damage the product or result in it
coming away from the wall. We will not be held responsible for any damage resulting from failure
to follow these instructions.
4. VESA compatible only with respect to screw mounting interface dimensions and mounting screw
specifications
5. Please use VESA standard as below.
5-1) 784.8 mm (30.9 inch) and under
* Wall Mount bracket Thickness : 2.6 mm
* Screw: Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm
5-2) 787.4 mm (31.0 inch) and above
* Please use VESA standard wall mount pad and screws.
WALL MOUNT: HORIZONTAL INSTALLATION
■ The image shown may be somewhat different from your Monitor set.
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
10 cm
10 cm
10 cm
Wall Mount
bracket
< Screw Mounting Interface Dimensions >
Model M2380D
M2380DF
VESA (A x B) 75 x 75
Wall mount
bracket (optional)
RW120
Loading ...
Loading ...
Loading ...