MK-12S07A
Instruction Manual
Model:
ELECTRIC KETTLE
Please read the manual before operating your kettle.Retain it for future
reference.
MK-12S07A
1
IMPORTANT SAFEGUARDS
SAFETY PRECAUTIONS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against fire,electric shock and injury to persons,
do not immerse cord,plugs, base or kettle in water or other
liquid.
4. Never leave the appliance unattended when in use.
Close supervision is necessary when any appliance is used
by or near children.
5. Unplug from outlet when not in use, no water in kettle,
flling water, moving kettle and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning
the appliance.
6. Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged
in any manner. Call our toll-free Customer Assistance
Number f
or examination, repair or adjustment.
7. Do not use a base unit other than the one supplied. The
use of accessory attachments not recommended by the
appliance manufacturer may result in fire, electric shock or
injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or
touch hot surfaces. Always store excess portion of the
power cord in the compartment of the base unit.
10. Electric kettle must be operated on a flat surface. Do not
place on or near a hot gas or electric burner, or in a
heated oven, or on the top of other electric appliances.
11. Always attach plug to appliance first, then plug cord into
the wall outlet. To disconnect, turn control to off, then
2
IMPORTANT SAFEGUARDS
remove plug from wall outlet.
12. Do not use appliance for other than intended use.
13. To avoid circuit overload, do not operate another high
wattage appliance on the same circuit.
14. Do not fill kettle when positioned on base. Dry the water
on the bottom of the body before placing it onto the power
base.
15. Be aware of steam being emitted from spout or lid
especially during refilling. Do not remove lid during boiling
cycle.
16. Do not use the kettle to heat anything other than water.
17. Do not fill above the “max” indication marking. Do
not operate kettle if water is below miniumum
marking. If the kettle is overfilled, boiling water may be
ejected. The kettle is only to be used with the base unit
provided.
18. Do not insert any object into slots or holes of the kettle.
19. Open the lid with the release button only. Push lid down
to lock in place.
20. Scaldi
ng may occur if the lid is removed during the
brewing cycles.
21. This appliance is for HOUSEHOLD USE ONLY.
DO NOT OPERATE APPLIANCE IF THE LINE CORD
SHOWS ANY DAMAGE OR IF APPLIANCE WORKS
INTERMITTENTLY OR STOPS WORKING ENTIRELY.
Extension cords
A short power-supply cord is to be provided to reduce the
risk resulting from becoming entangled in or tripping over a
longer cord. Longer detachable power-supply cords or
extension cords are available and may be use
d if care is
exercised in their use. If a longer detachable power-supply
SAFETY PRECAUTIONS
IMPORTANT SAFEGUARDS
3
cord or extension cord is used,
22. The marked electrical rating of the cord set or extension
cord should be at least as great as the electrical rating of
the appliance, and
23. The extension cord should be a grounding-type 3-wire
cord, and
24. The longer cord should be arranged so that it will not
drape over the countertop or tabletop where it can be
tripped over, snagged, or pulled on unintentionally
(especially by children).
If this appliance has a pola
rized plug (one blade is wider
than the other). To reduce the risk of electric shock,this
plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse
the plug. If it still does not fit.contact a qualified electrician.
Do not attempt to mofify the plug in any way.
SAVE THESE INSTRUCTIONS.
SAFETY PRECAUTIONS
4
Part Name
Brief introduction
1. Rapid boiling,save time and energy for you.
2. Removable filter to keep the water clean of any foreign matter.
3. Steam control to switch the kettle off after boiling.
4. Automatically cuts out for boil-dry protection.
5. 360 Rotational power base.
6. Easy read water gauge.
7. Thermostat of high quality.
Rational design, bring convenience and enjoyment to your life
No.
Description
1
2
3
4
5
Lid
Switch/Light
Handle
Spout
Power Base
5
Technical Date of the Product
How to use
Model No.
Rated voltage CapacityRated power Dimensions
120V~ 60Hz 1.2L1500W 85x145x226mm
MK-12S07A
For the first time to use or no use for a long time, it is recommended that you
fill to the maximum level mark with fresh tap water, boil and empty the kettle
at least 2 times to clear kettle of any tiny particles. Do not drink such water.
1. Press the lid lock on the handle, and you can open it.
2. Remove the kettle from the base to the filling place. Fill the kettle with
desired amount (no less than the minimum and no more than the
maximum.) Put back the lid; place the ket
tle back on the base unit.
3. Connect the plug into a power outlet (120V, AC), switch the kettle on by
pressing the switch. The light will illuminate to indicate the kettle is
heating.
4. The kettle will automatically switch off once the water has boiled and the
neon light goes off.
5. Lift the kettle from the base, and you can pour out the water into
container.
6. Correct Operation of Pouring Water: slowly lean the kettle to the right
angle(no larger than 90 derees ) to keep water pouring smoothly and
steady.
Weight
0.9kg
Cleaning
6
Note
To prolong the kettle's life, please clean the mineral deposits in the kettle
regularly.
Always unplug from the plug socket and allow to cool down before cleaning.
Do not use chemical, steel wool, or abrasive cleaners to clean the outside
of the kettle, as these will scratch the surface and fade the outside color.
1. Fill the kettle with 0.5L white vinegar and the remainder with water and
allow to stand for over 1 hours ;
2. Empty the solution from the kettle. Wipe off the deposits remained with
damp cloth
3. Fill the kettle with clean water, bring to boil and then discard the water.
Repeat and the kettle will be ready to use;
4. If necessary, repeat the operations above for several times;
5. Do not immerse into water. The surface of the kettle may be wiped over
with a damp cloth and polished with a soft dry cloth.
6. Grasp the top of the scale filter and pull upwards to remove. Wash with
clean water and dry thoroughly before replacing in the kettle.
Specifications
Product
Model
Rated voltage
Rated frequency
Rated power
:
:
:
:
:
ELECTRIC KETTLE
MK-12S07A
120V~
60Hz
1500W
