Loading ...
Loading ...
PAGE 3
READ AND SAVE THESE INSTRUCTIONS
The installer must leave these instructions with the homeowner. The homeowner must
keep these instructions for future reference and for local electrical inspectors' use.
You can be killed or seriously injured if you don’t follow instructions.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
Installation work and electrical wiring must be done by qualified person(s) in accordance
with all applicable Codes and Standards, including Fire Rated Construction. Sucient air is
needed for proper combustion and exhausting of gases through the flue (chimney) of fuel
burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s
guideline and safety standards such as those published by the National Fire Protection
Association (NFPA), and the American Society of Heating Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code authorities. When cutting or drilling
into wall or ceiling, do not damage electrical wiring and other hidden utilities. Ducted fans
must always be vented to the outdoors.
Use this unit only in the manner intended by the manufacturer. If you have any questions,
contact the manufacturer.
Before servicing or cleaning unit, switch power o at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
WARNING - TO REDUCE THE RISK OF SHOCK: This fan must be installed with an isolating
wall control / switch.
CAUTION: For General Ventilating Use Only. Do Not Use To Exhaust Hazardous or Explosive
Materials and Vapors.
To reduce the risk of fire, use only metal ductwork.
This unit must be grounded.
This unit is suitable for use with solid-state speed controls.
For Residential use ONLY
WARNING
Loading ...
Loading ...
Loading ...