Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
12
EN
CART & GRILL ASSEMBLY
(continued)
12. Install 1 flat washer and hex bolt at the rear inside wall of the cart as shown here using a 7/16” wrench
or socket wrench. Repeat this on the opposite side of the cart. If all cart panels are properly aligned
with the grill head, you may now tighten all the bolts.
Note: If the holes do not wish to align, a large bar-clamp may be used as shown below to help pull
everything together. Use rags or small pieces of cardboard to cushion the clamp and not scratch the finish
on your grill and cart.
Loading ...
Loading ...
Loading ...