BP9060 User Manual

Loading ...

Connection Option 2: Speaker-Level + LFE with “Y” Connector

FIGURE 5 – Speaker-Level + LFE with "Y" Connection Diagram

For those who demand greater customization, Option 2 gives you the ability to control the amount of low frequencies

(those below the crossover point set in your receiver/processor) sent to the subwoofer. Should you prefer Option 2,

we highly recommend setting the crossover point in your receiver/processor to 80Hz or below to avoid disturbing the

delicate blending between the subwoofer and midrange. In addition, careful balance between the subwoofer output

level of your receiver and the bass control on the back of your speaker should be considered. We recommend starting

with the bass control at 12 o’clock. (as shown in Figure 5).

Directions:

• Connect speaker wire from receiver/ampliﬁer to speaker level input

• Connect RCA Y-Cable from LFE or Sub-out of receiver/processor to LFE input on both Left and

Right BP9000 speakers

• Adjust receiver or processor settings to: Speaker (Small); Subwoofer (Yes)

For additional advanced

connection methods,

please visit the Deﬁnitive

Technology website or

give us a call.

"Y" CABLE NOT INCLUDED

Loading ...

Definitive Technology BP9060 Tower Speaker