Loading ...
Loading ...
Loading ...
Before using the remote control unit
The remote control unit has a built-in lithium battery.
Pull out the insulation sheet before use.
.
o
Replacing the battery
1. Pull the groove on the left side of the battery case at the bottom of
the reverse side of the remote control unit to the right.
2. In this state, pull the battery case downwards.
.
3. Insert the lithium battery (CR2025) correctly into the battery
compartment as indicated.
4. Replace the battery case in the original position.
.
NOTE
0
When inserting the lithium battery, be sure to do so in the proper direction,
following the q and w marks in the battery compartment.
0
If the battery should have a leakage, immediately replace and dispose of the
battery. In this case, there is a risk of burn when the liquid comes in contact
with skins or clothes, so a great care should be taken. If the liquid accidentally
comes in contact, wash with tap water and consult a doctor.
0
Remove the battery from the remote control unit if it will not be in use for long
periods.
Contents Setup Use Troubleshooting Status LED Appendix
20
Loading ...
Loading ...
Loading ...