Loading ...
Loading ...
Loading ...
Fig. 20
The following tool is supplied with the appliance:
Fig. 21
The following tool is also required:
Fig. 22
If the depth of the unit is
less than 21-3/4 in.
(553 mm) remove the
spacers on the back of the
appliance in order to be
able to push the appliance
completely into the recess.
Removing the spacers may
cause the appliance to use
more energy as this
reduces the ventilation
cross-section.
u
Undo the screw and remove the spacers.
For appliances with a water filter:*
Fig. 23
*
u
Cut open the water hose
Fig. 23 (52)
behind the appli-
ance both in front of and behind the connector
Fig. 23 (53)
(90° to direction of the hose).*
When doing so, make sure the hose does not become
kinked and the cross-section of the hose remains round.*
u
Connect the supplied exten-
sion hoses
Fig. 24 (54)
to the
appliance hoses
Fig. 24 (52)
:
Slide the appliance hoses
into the connectors as far as
they will go (approx. 11/16 ''
(17 mm)) (see 12 Installing
the water filter*) .*
Fig. 24
*
u
Position the hoses using a piece
of string so that they can be
connected to the water filter later
(see 7 Kitchen cabinet setup for
the water filter*) .*
*
All appliances:*
Installing the appliance in the recess.
* Depending on model and options 13
Loading ...
Loading ...
Loading ...