Loading ...
Loading ...
Loading ...
In case of emergency 9-3
9
– CONTINUED –
the “Temporary spare tire” section in this
chapter for instructions and precautions.
Removing the spare tire
1. Take the wheel nut wrench and exten-
sion out of the tool bag. Refer to the “Main-
tenance tools” section in this chapter.
2. Remove the subfloor storage lid in the
cargo area.
3. Take out the jack.
4. Remove the cap.
5. Locate the hex-headed hoist shaft end
inside the hole.
6. Fit the extension onto the hex-headed
hoist shaft end.
7. Fit the wheel nut wrench onto the ex-
tension.
8. Turn the hoist shaft end counterclock-
wise with the wheel nut wrench until the
temporary spare tire is on the ground with
enough cable slack to allow you to pull it
out from under the vehicle.
900202
900204
900205
y Be sure to remove (not simply
keep it open) the subfloor storage
lid before turning the wheel nut
wrench, otherwise the lid may be
damaged.
900206
A3120BE-B.book 3 ページ ２００６年５月３０日 火曜日 午前９時３２分
Loading ...
Loading ...
Loading ...