Loading ...
Loading ...
Loading ...
How to remove scale from the ice making system.
Cleaning this machine involves adding a solution of
scale remover and water to the ice machine and
continuing to add it as it makes ice. The scale
remover must be diluted to the correct ratio. A
squirt bottle will make adding the scale remover
much easier when the unit is built in. If not built in,
remove the top panel for reservoir access.
Recommended tools: Rubber gloves, squirt bottle
& scale remover. Pre-Mixed 16 oz squirt bottle of
scale remover is part number 19-0664-01.
1. Scoop out and discard all of the ice.
2. Press and release the On/Off button.
3. Open door and locate screws at upper back wall
of bin. Remove the two screws.
4. Remove the back panel of the bin by lowering it
down past the scoop holder, feel free to rotate the
scoop holder loop down to make more room.
5. Locate water valve on/off knob. Turn the water
Off by turning the water valve knob to the right
"counter clockwise" 90 degrees. The valve must be
turned off before the the cover can be removed.
6. Push tab on front edge of reservoir cover and
remove the cover. Note: Adjacent wires are low
voltage and are not hazardous.
May 2018
Page 13
SCN60
User's Manual
Push Tab
Screws
Reservoir Cover
Release Tab
Float Valve
On/Off Knob
Lift Reservoir Cover to Remove
Loading ...
Loading ...
Loading ...