Loading ...
Loading ...
Loading ...
www.PyleUSA.com
10
TROUBLESHOOTING
*If all solutions given above don't work for you, please take actions below:
1. Re-set the robot by switching on the power button;
2. If re-set action doesn't work, please send the robot to seller for repairing.
Note: Particular specications are subjected to change without prior notice.
Problem Possible Cause Solution
1
2
3
4
5
6
7
Red LED stays
after power on
Vacuum on but
can not collect
dirt and hair
The product is
moving
backwards after
being started
LED indicators
ash in blue after
4hrs charging
The side brushes
crooked, not
good to sweep
The product
won’t start
The product
circles around
only, cannot go
straight
1. Battery Low condition
2. Main body is picked up
1. The dust bin is full
2. The lter is not installed
correctly
1. The product is on dark
colored oor
2. Anti-drop sensor light
was covered
Power supply might been
cut o during harging
Being used for a
long time
1. Battery is not installed
properly
2. Battery low
3. The robot is under
protection status
One of the wires of the
wheels might be
loosened
1. Recharge the battery
2. Replace the robot on
the oor
1. Clean the dust bin
2. Re-install the lter
correctly
1. Put the robot on light
color oor.
2. Clean anti-drop sensor
light.
The robot can be operated
if the battery has been
fully charged for 4hrs
If it becomes crooked,
please scald it in hot
water to recover it to
its original shape
1. To install the battery
correctly
2. To have the battery fully
charged (turn o the
cleaner rst)
3. To re-set the robot
1. Open the wheel cover
and connect the loosen
wire properly
2. Send the robot to seller
for repairing
Loading ...
Loading ...