Loading ...
Loading ...
Loading ...
!
98
This model is provided with an indicator
light on the control panel that lights up when
the salt needs to be topped up. The
appearance of whitish stains on dishes is
generally a warning sign that the salt
container needs filling.
After filling the salt container, you should
press this button for a few seconds, until the
corresponding indicator light switches off.
The dishwasher start time can be set with
this button, delaying the start by 3, 6 or 9
hours.
Proceed as follows to set a delayed start:
" Choose a programme by pressing the
"PROGRAMME SELECTION" button.
" Press the "DELAY START" button (each
time the button is pressed the start will be
delayed by 3, 6 or 9 hours respectively,
and the corresponding time indicator light
will switch on).
" To start the countdown, press the
"START/RESET" button (the set time
indicator light will start to flash).
If a 9 hour delay is set, countdown will be
displayed by the 6h indicator light after 3
hours and the 3h indicator light after 6
hours.
At the end of the last 3 hours (at the end of
countdown) the 3h indicator light will stop
flashing and remain on to indicate the
washing phase and the programme will
start automatically.
If countdown has not ended, whereby the
programme has not yet started, it is
possible to change or cancel the delayed
start and select another programme or to
select/deselect the option button,
proceeding as follows:
" Hold the "START/RESET" button down
for at least 3 seconds. Some audible
signals will sound and the programme
indicator lights will turn on and off
individually and sequentially.
" The delayed start and the selected
programme will be cancelled. The
programme indicator lights will flash, the
dishwasher is ready start Programme.
You can deactivate turning on and off of the
audio signal as follows (the default setting is
active):
" Turn on the dishwasher by pressing the
"ON/OFF" button for about 3 sec.
"
Hold down the "PROGRAMME SELECTION"
and "ON/OFF" buttons for about 5 sec.
" All the indicator lights will flash for 5 sec.
- If the audio signal is active, the
"EXPRESS" indicator light will be on.
- If the audio signal is not active, the
"EXPRESS" indicator light will be off.
1. Press the "EXPRESS" button to turn the
audio signal on or off.
"NO SALT" indicator light
"RESET" button for "NO SALT"
indicator light
WARNING:
If you press the reset button without
filling the salt container, this will
interfere with the correct functioning of
the salt indicator light.
In order to guarantee the correct
functioning of the salt indicator light,
YOU MUST ALWAYS FULLY REPLENISH
THE SALT CONTAINER.
"DELAY START" button
Activation/Muted END-OF-
PROGRAMME signal.
Loading ...
Loading ...
Loading ...