Loading ...
Loading ...
Loading ...
7
english
If you’re using an Xbox 360 Wireless
Networking Adapter that’s already
connected to the back USB port, you’ll need
to disconnect its USB cable and reconnect it
to a front USB port using the WiFi extension
cable, provided.
To reconnect a wireless networking adapter
to a front USB port, if necessary:
1 Unplug the wireless networking adapter
cable from the USB port on the back of
the console, leaving the adapter itself
attached to the console.
2 Attach the WiFi extension cable to the
wireless networking adapter’s USB cable.
3 Plug the other end of the extension cable
into a USB port on the front of your
console.
Electrical Safety
As with many other electrical devices,
failure to take the following
precautions can result in serious injury
damage to the sensor.
If you use AC power, select an
appropriate power source:
1.1A. Use only the AC adapter on the
USB/power cable that came with your
sensor or that you received from an
authorized repair center.
provides the type of power indicated
on the USB/power cable, in terms of
voltage (V) and frequency (Hz). If you
aren’t sure of the type of power
supplied to your home, consult a
sources, such as generators or
inverters, even if the voltage and
frequency appear acceptable. Use
only AC power provided by a
standard wall outlet.
extension cord, power strip, or other
they are rated to handle the total
current (in amps [A]) drawn by the sensor
(indicated on the USB/power cable) and
any other devices that are on the same
circuit.
To avoid damaging the USB/power cable:
sharply bent, particularly where it
connects to the power outlet and the
sensor.
otherwise abuse the cable.
heat.
on the cable.
the plug—do not pull on the cable.
If the USB/power cable becomes damaged
in any way, stop using it immediately and
contact Xbox Customer Support for a
replacement.
Unplug your sensor’s USB/power cable
during lightning storms or when unused for
long periods of time.
Loading ...
Loading ...
Loading ...