Loading ...
Loading ...
Loading ...
Installation instructions
CombiCooler/Cooler/WineCooler/Freezer
V6000 Supreme, integrated
1091916-R01
07/05/2020
1091916-R01
21
Fitting the water filter (depending on model)
If the appliance is equipped with an ice-maker, before switching it on make sure that the water filter cartridge is installed and the hy-
draulic circuit is filled with water. The water filter ensures optimal water quality for making ice cubes from up to 3,000 l of water and for
up to 12 months. When the filter is almost exhausted a corresponding message appears in the display.
Procedure for the CombiCooler V6000 Supreme (51096)
The filter is located behind the glass panel in the top of the refrigerator compartment.
▸ Pull both catches at the front of the glass panel to release it.
▸ Carefully pull out the glass panel.
▸ Take the end cap off the cartridge, set the cartridge in the holder and turn clockwise one
quarter turn until it clicks into place.
▸ Connect the water hose to the tap using the seals included in the scope of delivery.
Procedure for the Freezer V6000 Supreme (51099)
Depending on the water quality, the use of a water filter is also recommended for the Freezer V6000 Supreme (51099); a water filter
is not strictly necessary if the water quality is high.
The scope of delivery includes an externally mounted water filter set. The water filter manifold
and water connections must be prepared before the freezer is finally installed; the water con-
nection at the back of the appliance to the water filter set must be in place before installing
the appliance. Install the water filter set in a position where it can be easily accessed (such as
in or below an adjacent cabinet) in order to be able to replace the water filter cartridge every
12 months.
Checking the completed installation
▪ Make sure the feet have been installed and adjusted correctly.
▪ Make sure there are no leaks in the water connection system (depending on model) and that the stopcock is easily accessible.
▪ Make sure the electrical connection has been carried out correctly and that the plug with all-pole switch is easily accessible.
▪ Make sure the appliance is perfectly aligned with the adjacent cabinets.
▪ Make sure all adhesive tape and temporary protection – both inside and on the outside of the appliance – has been removed.
▪ Make sure the doors seal tightly and that the drawers and drawer bottoms slide smoothly.
Loading ...