Sony MDR-EX10LP

Product's Documents

Below are documents related to this product, you can read online or download:
User Manual Other Documents
MDR-EX10LP photo

User Manual

This is the main product document for model MDR-EX10LP.

The file format is pdf, 2 pages, you can download this manual here .

background
Stereo
Headphones
MDR-EX10LP
4-421-872-
11
(1)
Operating Instructions
Manual de instrucciones
English
Stereo headphones
Features
400 kJ/m
3
high power neodymium magnets produce high-resolution treble and
midrange with powerful bass
Hybrid silicone rubber earbuds (S, M, L) supplied for secure fitting and long-term
wearing comfort
Y-type cord with cord slider to prevent cord tangling
Convenient cord adjuster supplied
How to use (see fig. )
Connect the headphones to a device with the stereo mini jack.
Wear the earpiece marked
in your right ear and the one marked in your left ear.
There is a tactile dot on the unit marked
to distinguish the left side.
Using the cord slider (see fig. -)
Move up and down to change the split position of the cord.
Installing the earbuds correctly (see fig. )
If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy
better sound quality, change the earbuds to another size, or adjust the earbuds position to
sit on your ears comfortably and fit your ears snugly.
If the earbuds do not fit your ears, try another size. When you change the earbuds, install
them firmly on the headphones to prevent the earbud from detaching and remaining in
your ear.
To check the transparent earbud sizes
The transparent earbud sizes are distinguished by a line pattern (see fig. -).
To check the black earbud sizes
The black earbud sizes are distinguished by the inside color (see fig. -).
Black earbud sizes (inside color)
Small
Large
S
(Orange)
M
(Green)
L
(Light blue)
To detach an earbud (see fig. -)
While holding the headphone, twist and pull the earbud off.
Tip
If the earbud slips and cannot be detached, wrap it in a dry soft cloth.
To attach an earbud (see fig. -)
Push the parts inside of the earbud into the headphone until the projecting part of the
headphone is fully covered.
To clean the earbuds
Remove the earbuds from the headphones, and wash them with a mild detergent solution.
Specifications
Type: Closed, dynamic
Driver unit: 9 mm, dome type (CCAW)
Power handling capacity: 100 mW (IEC*)
Impedance: 16 Ω at 1 kHz
Sensitivity: 100 dB/mW
Frequency response: 8 – 22,000 Hz
Cord: Approx. 1.2 m (47
1
/4 in), Litz cord Y-type
Plug: L-shaped stereo mini plug
Mass: Approx. 3 g (0.11 oz) (without cord)
Supplied accessories
Earbuds S (2), M (2), L (2)
Card warranty (1)
Operating Instructions (1)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
Precautions
Please keep your headphones clean at all times especially inside the rubber earbud.
(see fig. )
If any dust or ear wax is inside the earbud, you may experience some listening
difficulties.
Listening with headphones at high volume may affect your hearing. For traffic safety,
do not use while driving or cycling.
The earbuds may deteriorate due to long-term storage or use.
Install the earbuds firmly onto the headphones. If an earbud accidentally detaches and
is left in your ear, it may cause injury.
Note on static electricity
In particularly dry air conditions, mild tingling may be felt on your ears. This is a result
of static electricity accumulated in the body, and not a malfunction of the headphones.
The effect can be minimized by wearing clothes made from natural materials.
Optional replacement earbuds can be ordered from your nearest Sony dealer.
©2010 Sony Corporation Printed in China
L-shaped
stereo mini plug
Approx. 1.2 m
Sectional View
Colored parts
S
2 lines
M
3 lines
L
4 lines
background
Español
Auriculares estéreo
Característícas
Los imanes de neodimio de alta potencia de 400 kJ/m
3
producen sonidos agudos y
medios de alta resolución con graves potentes
Almohadillas de caucho de silicona híbridas (S, M, L) incluidas para asegurar un ajuste
seguro y comodidad por mayor tiempo
Cable de tipo Y con deslizador del cable para evitar enredos del cable
Cómodo ajustador de cable incluido
Utilización (consulte la fig. )
Conecte los auriculares a un dispositivo con la minitoma estéreo.
ngase la unidad auricular con la marca
en el oído derecho y la unidad con la marca
en el oído izquierdo.
En la unidad con la marca
hay un punto táctil para diferenciar el lado izquierdo.
Utilización del deslizador del cable (consulte la fig. -)
Muévalo hacia arriba o hacia abajo para cambiar la posición de la separación del cable.
Instalación correcta de las almohadillas (consulte la fig. )
Si las almohadillas no se ajustan correctamente a sus oídos, es posible que no pueda oír
los sonidos graves bajos. Para disfrutar de una mejor calidad de sonido, cambie las
almohadillas por otro tamaño o ajuste la posición de las almohadillas para poder
colocarlas cómodamente en sus oídos y ajustarlas suavemente a ellos.
Si las almohadillas no se ajustan a sus oídos, intente probar con otra medida. Cuando
cambie las almohadillas, trate de instalarlas firmemente para evitar que se desprendan y
permanezcan en su oído.
Comprobación de los tamaños de las almohadillas transparentes
Un patrón de línea indica los diferentes tamaños de las almohadillas transparentes
(consulte la fig.
-).
Comprobación de los tamaños de las almohadillas negras
El color interior indica los diferentes tamaños de las almohadillas negras (consulte la fig.
-).
Tallas de almohadillas negras (color interior)
Pequeño
Grande
S
(Naranja)
M
(Verde)
L
(Azul claro)
Extracción de las almohadillas (consulte la fig. -)
Sostenga el auricular, gire la almohadilla y extráigala.
Sugerencia
Si la almohadilla se resbala y no puede quitarla, envuélvala con un paño seco y suave.
Colocación de las almohadillas (consulte la fig. -)
Presione la parte interna de la almohadilla contra el auricular hasta que la parte saliente
del auricular esté completamente cubierta.
Limpieza de las almohadillas
Quite las almohadillas de los auriculares y lávelas con una solución detergente suave.
Especificaciones
Tipo: Cerrado, dinámico
Unidad auricular: 9 mm, tipo domo (CCAW)
Capacidad de manejo de potencia:
100 mW (IEC*)
Impedancia: 16 Ω a 1 kHz
Sensibilidad: 100 dB/mW
Respuesta de frecuencia: 8 – 22.000 Hz
Cable: Aprox. 1,2 m, cable Litz de tipo Y
Clavija: Minitoma estéreo con forma de L
Peso: Aprox. 3 g (sin cable)
Accesorios incluidos
Almohadillas S (2), M (2), L (2)
Tarjeta de garantía (1)
Manual de instrucciones (1)
* IEC (International Electrotechnical Commission) = Comisión Electrotécnica Internacional
El diseño y las especificaciones están sujetos a cambios sin previo aviso.
Precauciones
Mantenga los auriculares siempre limpios, en especial la parte interior de la
almohadilla de goma (consulte la fig. ).
Si la almohadilla contiene cualquier partícula de polvo o de cera, es posible que
experimente dificultades para escuchar el sonido.
El uso de los auriculares con un volumen demasiado alto podría dañar sus oídos. Por
razones de seguridad vial, no los utilice mientras conduzca o vaya en bicicleta.
Es posible que las almohadillas se deterioren con el paso del tiempo a causa de las
condiciones de almacenamiento y del uso.
Coloque las almohadillas firmemente en los auriculares. Si una almohadilla se
desprendiera accidentalmente y se quedara en su oído, podría causarle lesiones.
Nota acerca de la electricidad estática
En condiciones de aire particularmente seco, es posible que sienta un suave cosquilleo en
los oídos. Esto es a causa de la electricidad estática acumulada en el cuerpo, y no a causa
de un mal funcionamiento de los auriculares.
Puede minimizar el efecto si utiliza ropa confeccionada con materiales naturales.
Las almohadillas de recambio opcional se pueden encargar a través del distribuidor
Sony más cercano.
Minitoma estéreo
con forma de L
Aprox. 1,2 m
Vista por secciones
Partes con color
S M L
2 líneas
3 líneas
4 líneas

Specifications

Sony MDR-EX10LP Questions and Answers

Questions and Answers

Related Products