Loading ...
Loading ...
Loading ...
PSd`[`Ye=
R^[ _dZkYj_ed ^eX ckij X[ _dijWbb[Z Xo W
fhef[hbo gkWb_\_[Z f[hied3 U[ ^Wl[ ekh emd
gkWb_\_[Z _dijWbb[hi3 M[l[h jho je _dijWbb j^[
Wffb_WdY[ oekhi[b\3
R^[ _dZkYj_ed ^eX ckij dej X[ _dijWbb[Z WXel[
h[\h_][hWjehi1 \h[[p[hi1 Z_i^mWi^[hi eh jkcXb[
Zho[hi3
R^[ _dZkYj_ed ^eX i^ekbZ X[ _dijWbb[Z ie j^Wj
efj_ckc hWZ_Wj_ed e\ ^[Wj _i feii_Xb[3
R^[ mWbb WdZ j^[ Wh[W WXel[ j^[ ^eX i^ekbZ
X[ WXb[ je m_j^ijWdZ ^[Wj3
Re Wle_Z Wdo ZWcW][1 j^[ iWdZm_Y^ bWo[h
WdZ WZ^[i_l[ i^ekbZ X[ ^[Wj2h[i_ijWdj3
Cedjheb fWd[b
A_h l[dj
C[hWc_Y fbWj[
A_h [djho
LUZW_Sf[U V[SYdS_ aX fZW Ua`fda^ bS`W^
83 F_n j^[ ^eX je j^[ mehajef ki_d] j^[ \ekh
XhWYa[ji ed j^[ XWi[ e\ j^[ ^eX3 R^[ fei_j_ed
e\ j^[ XhWYa[ji YWd X[ WZ`kij[Z WYYehZ_d] je
j^[ j^_Yad[ii e\ j^[ jef3
A[SYdS_ aX [`VgUf[a` ZaT=
.6/
.7/
.8/
.9/
.:/
4
1
2
3
45
1
1.Heating zone selection key
2.Timer key
3.ON/OFF
4.System key
5.Power regulating key
1
2
3
4
93 @a``WUf[a` fa baiWd egbb^k
F_]kh[ .8/
50/60Hz
50/60Hz
The installer must ensure that the correct
electrical connection has been made and that
it complies with safety regulations.
The cable must not be bent or compressed.
If the cable is damaged or needs replacing,
this should be done by an after-sales
technician using the proper tools, so as to
avoid any accidents.
For CB640CBA/1 model:
The socket should be connected in compliance
with the relevant standard, to a single-pole
circuit breaker. The method of connection is
shown in Figure 3.
If the appliance is being connected directly to
the mains supply, an omnipolar circuit breaker
must be installed with a minimum gap of 3 mm
between the contacts.
The cable must be checked regularly and only
replaced by a properly qualified person.
Loading ...
Loading ...
Loading ...