Loading ...
Loading ...
Loading ...
(261,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 7
accident may occur. When driv-
ing the vehicle, always check the
traffic around the vehicle directly
with your eyes and the mirrors.
. Always operate the vehicle as
you would without the Front View
Monitor.
. Do not use the Front View Monitor
in the following situations.
– You are driving on a dirt road
or a road covered in snow.
– The camera malfunctions (e.g.
the lens or bracket is broken).
. If the outside temperature is low,
the monitor screen may become
dark or the image may become
dim. In particular, the image of a
moving object may be distorted
or disappear from the screen.
You must always check the traffic
around the vehicle directly with
your eyes when driving it.
& How to access the Front View
Monitor
S06BA01
1) VIEW switch
To change over to the camera screen,
perform either of the following operations
when the ignition switch is in the “ON”
position.
. Press the VIEW switch.
. Shift the select lever from “R” to “D”
(only when the Camera Shift Link is set to
“On”) (for details, refer to “Camera shift link
setting” F3-58.)
& How to cancel the Front View
Monitor
S06BA02
! Manual cancellation
S06BA0201
Press the VIEW switch again.
! Automatic cancellation
S06BA0202
If any of the following conditions are met,
the Front View Monitor is canceled auto-
matically.
After accessing the Front View Monitor
by pressing the VIEW switch:
. Approximately 3 minutes have passed
since the last operation.
. The vehicle speed becomes 12.5 mph
(20 km/h) or more.
. The select lever (CVT models) is
shifted to the “P” position.
. The parking brake is applied.
After accessing the Front View Monitor
by using the select lever:
. Shift the select lever into the “P”
position.
. The vehicle speed becomes 5 mph (8
km/h) or more.
. Approximately 9 seconds have passed
since the last operation.
. The parking brake is applied.
– CONTINUED –
Interior equipment/Front View Monitor
6-15
6
Loading ...
Loading ...
Loading ...