Loading ...
Loading ...
Loading ...
x3
Cleaning Your Hard Floors
NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning
with the Powerfresh® Deluxe Steam Mop.
YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC TILE,
VINYL, LAMINATE, MARBLE, STONE AND SEALED HARDWOOD FLOORS. USE OF YOUR
STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED
GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST
RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS
FROM YOUR FLOORING MANUFACTURER.
www.BISSELL.com
Plug the machine into a properly
grounded outlet. To start cleaning
your hard floors, turn the machine
ON by pressing the POWER
button. Once the blinking light
turns solid, select the appropriate
steam level. See page 8.
Press On-Demand Steam Trigger
to release steam as desired.
9
1
2
3
Step on the back of the foot
to recline the body of the
machine to begin cleaning.
To sanitize an area of your floor,
use the microfibre cloth pads
and slowly and evenly stroke
your steam mop back and
forth at least three times using
continuous steam.
When finished, turn the machine
off by pressing the POWER
button and unplugging the unit.
NOTE: For best results, remove
the pad and wash after use.
NOTE: For overly challenging and stuck-on messes, step on the release pedal
located on the back of the machine and lift up to use the SpotBoost Brush.
See page 7. When removing the SpotBoost Brush™, make sure to lift it away
from your body as the bottom of the brush will release steam.
Loading ...
Loading ...
Loading ...