Loading ...
Loading ...
Loading ...
8 Technical data
Dimensions 27 x 19 x 3.8 cm
10.6 x 7.5 x 1.5 inches
Weight 1.5 kg / 3.3 lb
Power supply DC 9V 2.2A
Power Consumption ≤ 20W
Operating temperature range
0 - 50°C (32 - 122°F)
Laser wavelength 650nm
Video system NTSC / PAL / AUTO
PHILIPS reserves the right to make design and specification changes for
product improvement without prior notice.
Modifications not authorized by the manufacturer may void users authority to
operate this device.
All rights reserved.
Copyright information
The making of unauthorized copies of copy-protected material, including computer
programmes, files, broadcasts and sound recordings, may be an infringement of
copyrights and constitute a criminal offence. This equipment should not be used for such
purposes.
Disposal of your old product
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product, it means
the product is covered by the European Directive 2002/96/EC.
Please be informed about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old product with
your normal household waste. The correct disposal of your old product will help prevent
potential negative consequences to the environment and human health.
Symptom Remedy
Distorted or B/W picture with
DVD
Use only discs formatted according to the TV-set used
(PAL/NTSC).
No audio at digital output • Check the digital connections.
Player does not respond to all
operating commands during
playback
• Operations are not permitted by the disc.
• Refer to the instructions in the disc inlay.
Cannot detect USB plug-in • Unplug the USB connection and plug-in again. Detection
may take some time that vary with the capacity of your
USB device.
• The DVD player only support Mass Storage (MSC)
format from USB flash drive.
• The DVD player does not support Hard Disk storage
or Media Transfer Protocol (MTP) format.
Cannot switch to AV-in or no
signal
• Unplug the AV-in connection and plug-in again.
• Check the connection from the AV output device,
such as digital camera, video recorder, etc.
• Use the provided AV cable for connection.
Switch between DVD/USB/AV-
in
• DVD mode is default source during the DVD player
power on.
• Plug in USB will activate USB mode. Deactivate it by
unplug the connection.
• Plug in AV-in will activate AV-in mode. And deactivate
it by unplugging the connection.
• Do not plug-in USB & AV-in at the same time. Plug-in
one type connection at a time only.
• Unplug the connection before you plug-in another
connection.
Player feels warm When the player is in use for a long period of time, the
surface will be heated.
This is normal.
Display goes dimmer when AC
is unplugged
The unit is saving power to ensure longer playtime with
battery. It is normal.
Adjust the brightness in the SETUP menu.
Player feels warm When the player is in use for a long period of time, the
surface will be heated.
This is normal.
This set complies with the radio interference requirements of the European Union.
Loading ...