Metal Pulsating Sprinkler Adjustements
METAL_PULSATOR_INS_00 Copyright © 2015 Melnor, Inc.
■
Adjusting the deector shield will adjust
the distance the water sprays . Raise the
deector shield up to get the maximum
distance. Lower the deector shield into the
spray of the water and the distance of the
spray will be reduced.
■
The adjustment screw at the front of
the sprinkler head diuses the water as
it is sprayed. When the screw is in the out
position, the water sprays in a ne stream.
When the screw is in, the tip of the screw
enters the stream of the water; this disrupts
the spray and causes the sprinkler to create a
more gentle, shower-like pattern.
■
Flip clip to the up position to allow the
sprinkler to rotate 360°.
■
When the clip is in the down position, the
head will rotate between the two rings .
Adjusting the rings will limit how much of a
circular area is watered.
■
To connect multiple units, use to attach a
second hose and an additional sprinkler unit.
Additional units will diminsh the maximum
coverage area of all sprinklers. (not available
on all models)
Spray Distance
Water Diusion
Flip Up For Full
Circle
Coverage Angle
Multiple Unit
Attachment
360°
270°
180°
90°
20°
Spray Angle Options and Adjustments
Note:
Pulsating sprinklers
require a minimum
of 30 psi. Without
adequate pressure,
the head will not
rotate properly.
S
p
r
a
y
A
r
e
a
P
i
n
C