Loading ...
Loading ...
Loading ...
7
1-877-646-5288
Using the Nutri Ninja
®
Cup
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the Power Pod on a clean, dry, level surface such
as a counter or table top.
3 Add ingredients to the Nutri Ninja Cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max Fill” line.
4 Place the Nutri Ninja Blade Assembly onto the cup and
screw it tightly until a good seal is achieved. (Fig. 1)
5 Turn the Nutri Ninja Cup upside down and place it onto
the Power Pod. Press down on the Nutri Ninja Cup to
pulse or blend. (Fig. 2, Fig. 3)
6 Once desired consistency is reached, remove pressure from
the Nutri Ninja Cup. Pull straight up to remove. (Fig. 4)
7 Turn the cup upright and remove the Nutri Ninja Blade
Assembly by twisting the blade assembly counter
clockwise.
(Fig. 5)
8 Do not store blended contents with the Nutri Ninja
Blade Assembly attached.
9 Place the Sip & Seal
®
lid onto the Nutri Ninja Cup, twist
to seal and enjoy!
10 For storage, only use Sip & Seal lid to cover.
11 Be sure to store the Nutri Ninja Blade Assembly
attached to an empty cup when not in use.
12 Make sure that the Power Pod is unplugged when not in
use.
NOTE: To order additional Nutri Ninja Cups, please visit
our website: www.ninjakitchen.com or feel free to
contact customer service: 1-877-646-5288.
Fig. 1 Fig. 2 Fig. 3 Fig. 4
For best results when blending drinks or smoothies, press down continuously until desired size
and consistency is achieved. For best results when food processing, use short “PULSES” by
pushing down on the cup in short, 1 second bursts, until desired consistency is achieved.
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja Cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the Nutri Ninja cup upon completion of blending. Do not
store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may
contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive
pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Sip & Seal Lid to cover.
IMPORTANT: Make sure that the Power Pod is plugged in for use.
Fig. 5
Loading ...
Loading ...
Loading ...