Loading ...
Loading ...
Loading ...
23
10f : Kebbe accessory (depending on the model)
This accessory fits on the metal mincer head (ma), enabling you to make small meatballs.
ACCESSORIES USED
- Kebbe accessory (p), motor block assembly (l) and metal mincer head (ma).
ASSEMBLING THE ACCESSORIES
- Insert the screw (m2) into the body (m1) of the metal mincer head (ma).
- Fit the kebbe making end (p2) on the head, aligning the two lock pins with the two notches on
the metal mincer head.
- Fit the ring (p1) on the kebbe making end (p2), followed by the nut (m5) and tighten well.
- Fit the assembled head on the motor block assembly (l).
- Turn the speed selector (a2) to the 2 position to start.
For easier use, if the food gets stuck in the mincer head (m), first unlock the motor block
assembly (l) then, but not from the motor unit (a), and remove the mincer head (m).
10g : Juice and coulis accessory (depending on the model)
This accessory fits on the metal mincer head (ma), enabling you to make juice from apples,
pears, oranges etc., as well as coulis of red berries (such as strawberries, raspberries), tomatoes,
etc.
ACCESSORIES USED
- Juice and coulis accessory (q), motor block assembly (l) and metal mincer head (ma).
ASSEMBLING THE ACCESSORIES
- Insert the screw (q2) equipped with its sealing gasket (q1) into the body (m1) of the metal
mincer head (ma).
- Install the desired filter (q3) for your preparation:
q3-1: small-hole filter for juices.
q3-2: mixed-hole filter for coulis.
- Slide the nut (m5) along the filter and screw it into the mincer head (m1).
Position the juice guide (q4) under the installed filter (q3).
- Place the assembled head on the motor block assembly (l).
- Turn the speed selector (a2) to the 2 position to start.
USAGE AND PRACTICAL TIPS
- Juice: use the filter (q3-1) with a single filtration hole diameter.
- Coulis: use the filter (q3-2) with 2 filtration hole diameters for better extraction.
- Place a container under the juice guide (q4) to collect the juice and another at the end of the
filter (q3) to collect waste.
CLEANING
The filters (q3) can be cleaned easily with the brush provided (q5).
Comment: this
accessory is used
without screens
or blades.
Comment: this
accessory is used
without screens
or blades.
Loading ...
Loading ...
Loading ...