Loading ...
Loading ...
Loading ...
18
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, cool air enters through the bottom
of the freezer section and moves up. Most of the air then
flows through the freezer section vents and recirculates
under the freezer floor. The rest of the air enters the
refrigerator section through the top vent.
MULTI FLOW
The cooling fan operates more powerful and effective
If water or foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition, if
gasket is damaged, efficiency may be lowered because
of escaping cool air.
Do not block any of these vents with food packages. If
the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT:
DOOR ALARM
Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the
Food Storage
Guide section for details.)
USING YOUR REFRIGERATOR
than in normal operation. This is specially noticeable
when new food is placed in the refrigerator compartment.
With this feature you´ll listen a alarm when the freezer or
refrigerator door is not closed within 1 minute after it is
opened. These tones repeat every 30 seconds.
The alarm is cancelled when the freezer or the refrigerator
is closed correctly.
About the controls with number settings.
About the controls with temperature settings.
FREEZER TEMP
REFRIGERATOR TEMP
COLDER
COLD
COLDER
COLD
CHANGING THE TEMPERATURE
To change the temperature, press and release the
COLD or COLDER pad. The SET light will come on
and the display will show the set temperature. To
change the temperature, tap either the COLD or
COLDER pad until the desired temperature is
displayed. Refrigerator temperatures can be adjusted
between 34 ºF and 47 ºF and the freezer temperatures
can be adjusted between -6 ºF and +8 ºF.
Once the desired temperature has been set, the
temperature display will return to the actual refrigerator
and freezer temperatures after 5 seconds. Several
adjustments may be required.
The temperature controls are preset in the factory at
37 ºF for the refrigerator compartment and 0 ºF for the
freezer compartment. Allow 24 hours for the
temperature to stabilize to the present recommended
settings.
The temperature controls can display both the SET
temperature as well as the actual temperature in the
refrigerator and freezer. The actual temperature may
vary slightly form the SET temperature based on usage
and operating environment.
Setting either or both controls to OFF stops cooling in
both the freezer and refrigerator compartments, but
does not shut off electrical power to the refrigerator.
Initially, set the refrigerator control at 5 and the freezer
control at 5 and allow 24 hours for the temperature to
stabilize.
Several adjustments may be required. Adjust the
controls one increment at a time, and allow 24 hours
after each adjustment for the refrigerator to reach the
temperature you have set.
Setting either or both controls to 0 stops cooling in
both the refrigerator and freezer compartments, but
does not shut off electrical power to the refrigerator.
Loading ...
Loading ...
Loading ...