Loading ...
Loading ...
Loading ...
11
Cybex Owner’s Manual
11. Attach each half together using the six BHSCS that were removed.
Nylon Locknut (6)
BHSCS (qty 6)
12. Attach pulley shaft using the pivot shaft and BHSCS that were removed.
BHSCS
Pivot Shaft
Washer
Pulley Shaft
Pulley/Cable
13. Reconnect belt to cam and reinstall pulley.
14. Connect other end of belt to the arm using the BHSCS and nylon locknut.
Shoulder
Bolt
Hex
Nut
15. Connect the weight stack belt to the belt clamp of cam that was removed.
Set
Screws
Cam
Install rubber feet
1. Remove each (standard) cone-shaped shipping support using a 3/4” socket or wrench.
2. Cut shipping tie securing top weight.
3. Place rubber feet (supplied with machine) on each foot of the frame.
Loading ...
Loading ...
Loading ...