Loading ...
Loading ...
Loading ...
Names & functions
Core
This control device acts like the brain of the robot, which makes it come to life.
USB / Bluetooth® LED
*1
The blue LED is for Bluetooth
connection and the green LED
is for USB connection.
Use a USB cable to connect a
compatible device to this port.
Power LED
This LED shows if there is
power being supplied to the
power connection port.
Power connection port
Connect the battery box.
Status LED
This LED shows the status of
the core.
Core buttons
These buttons can do dierent
things, depending on the code.
Input port
Connect the sensor blocks (light sensor, push
switch, IR photoreector and accelerometer)
here.
Output port
Connect the motor blocks (DC motor, servo
motor), LEDs and buzzers here.
*1. Interoperability and compatibility among Bluetooth devices vary. *2. Batteries not included.
USB port
Battery box
How to install batteries
Remove the
screw with a
cross-head
screwdriver.
Place the
batteries in.
Make sure to
put them in the
right direction.
Slide the cover
as shown by
the arrows.
Place the
cover back and
tighten the
screw.
Multi LED
This LED shows dierent status with dierent
colors. You can control it by coding.
You will need 3 alkaline batteries (1.5V AA/LR6)
*2
and a
cross-head screwdriver.
1 2
3 4
Power switch
Flip the switch to turn the power supply
on & o to the core.