Loading ...
Loading ...
Loading ...
en-US
17
Park system for storage (Fig. 17)
Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Remove
the plug from the socket.
Stand the vacuum cleaner upright.
It is a good idea to retract the tele-
scopic suction wand fully.
Slot the floorhead downwards into
one of the parking attachments on ei-
ther side of the vacuum cleaner (the
parking attachments cannot be used
with Electrobrushes SEB 228 and
SEB 236).
This makes the vacuum cleaner easier
to carry or store.
For safety reasons, do not lift the
vacuum cleaner using the dust con-
tainer carrying handle.
Maintenance
Always switch off the vacuum
cleaner for maintenance work and
unplug the power cord from the wall
socket.
Emptying the dust
container(Figs. 18 - 23)
Empty the dust container before the
dust has reached the max marking
on the dust container.
Pull the dust container handle up-
ward.
Remove the dust container upward.
The contents of the dust compartment
can be disposed of with the normal
household trash, providing it contains
general household dust only.
Hold the dust container close to the
trash can so that as little dust billows
out as possible.
Press the yellow release button on
the bottom of the dust container.
The flap will open and the dust will fall
out.
Close the flap firmly. It should click
into place.
Insert the dust container down into
the vacuum cleaner so that it audibly
clicks into place.
Push the handle down.
Cleaning the dust container
Clean the dust container as required.
Clean the dust container using water
and liquid dish soap.
Dry the dust container carefully.
Cleaning the filter
frame(Figs. 24 + 25)
A removable filter frame is located in the
dust container. This should be cleaned
if it is obviously dirty.
Place the emptied and open dust
container on its front.
Release the filter frame and remove it.
Empty the filter frame and rinse it un-
der cold running water.
Loading ...
Loading ...
Loading ...