Loading ...
Loading ...
Loading ...
3-15
E
EJU18351
Switches
CAUTION:
@
Do not run the engine for more than 15
seconds on land without supplying
water. The engine can overheat.
@
Check the start switch, the engine stop
switch, and the engine shut-off switch for
proper operation.
Push the start switch 1 to start the
engine. As soon as the engine starts run-
ning, push the engine stop switch 2 to ver-
ify that the engine stops immediately.
Restart the engine, and then pull the engine
shut-off cord 5 to remove the clip 4 from
the engine shut-off switch 3 to verify that
the engine stops immediately. (See pages
2-10 to 2-11 for information on proper opera-
tion of the start switch, the engine stop
switch, and the engine shut-off switch.)
EJU01061
Cooling water pilot outlet
Check that water comes out from the out-
lets while the engine is running and the
watercraft is in the water.
EJU01246
Multifunction meter
Check the operation of the multifunction
meter. (See pages 2-20 to 2-29 for operation
of the meter.)
UF0V13.book Page 15 Friday, June 6, 2003 11:32 AM
Loading ...
Loading ...
Loading ...