Loading ...
Loading ...
Loading ...
1. BEFORE USE
Unpack your ceiling fan carefully then remove all parts and components and lay on a cloth or
soft surface to avoid damage. Do not lay the motor housing on its side, the housing may get
damaged. Before commencing installation, check that all parts are included.
2. PRODUCT ASSEMBLY
WARNING: All electrical tasks should only be undertaken after disconnection of electricity
by removing fuses or turning off the circuit breaker to avoid risk of electric shocks.
ASSEMBLY STEPS:
2.1. INSTALLATION OF THE MOUNTING BRACKET
The hanger bracket must be screwed on to a firm flat surface. The structure to which it is
installed must be able to withstand ten times the static weight of the fan. In case of installing
the ceiling fan to a wooden joist, 2 self-tapping screws provided should be enough to support
the ceiling fan. The washers provided must be placed in the following Order:
screw head > round washer > spring washer > mounting
bracket > ceiling.
Screw the mounting bracket to the ceiling and make sure all
connections are secure to prevent the fan from falling. Loosen
the two canopy screws from the mounting bracket.
NOTE: Self-tapping screws are only suitable for wooden ceilings.
In case of installing the ceiling fan to concrete ceilings or joists,
use a drill for making the holes and stoppers or expansion
screws (not included).
• Do not use the appliance in confined spaces with explosive or toxic vapours.
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Make sure you install all-poles disconnection switch with a minimum distance of 3 mm
between poles in the supply wiring to the ceiling fan.
• Make sure the installation site will not allow the rotating fan blades to come into contact with
any object and that there is a minimum distance of 150mm (6”) from the blade tip to the wall
or ceiling. Please note that the bigger this distance is, the more airflow the fan will produce.
• Switch off the power before connecting or repairing the fan.
• The electrical wiring must be in accordance with the local regulations.
• The fan must be properly grounded to avoid the risk of electric shocks. Never mount the fan
in a moist or wet room. Be careful when working near the rotating blades.
• This appliance must be installed in accordance with the national electrical installation regula-
tions.
• Ensure that the fan is switched off from the supply mains before removing the guard.
• If unusual oscillating movement is observed, immediately stop using the ceiling fan and con-
tact the manufacturer, its service agent or suitably qualified persons.
• The replacement of parts of the safety suspension system device shall be performed by the
manufacturer, its service agent or suitably qualified persons.
• The mounting of the suspension system shall be performed by the manufacturer, its service
agent or suitably qualified person.
• In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes,
polystyrene, etc.) away from their reach.
Loading ...
Loading ...
Loading ...