SRS-XB3 User Manual

Loading ...

between the BLUETOOTH device and other BLUETOOTH device(s).

To terminate the Speaker Add function while in use, press and hold the ADD button until a beep is heard.

When the speaker, that had been used as the Speaker Add function the last time, is turned on, the speaker will try to establish the Speaker Add

function with the other speaker that had been connected. If you want to use two SRS-XB3 speakers as the Speaker Add function again, turn the

other speaker on within a minute, otherwise the speaker will terminate the automatic connection as the Speaker Add function.

If you want to use the speaker that had been used as one of the speakers of the Speaker Add function by itself, press the

(power) button to turn

on the speaker, then press and hold the ADD button until a beep is heard to terminate the Speaker Add function since the speaker tries to

establish the last-made connection.

When using the Speaker Add function, switch the codec to SBC.

Note

If you reset or initialize one of the two speakers while using the Speaker Add function, make sure to turn off the other speaker. If you do not turn

off the other speaker before restarting the Speaker Add function, there may be problems in making a BLUETOOTH connection and outputting

sound.

When you make a BLUETOOTH connection by One-touch (NFC), touch the speaker where the

(BLUETOOTH) indicator is lit. The device

cannot make a BLUETOOTH connection with the speaker where the

(BLUETOOTH) indicator is turned off.

User Manual - Page 63