Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
21
EN
LIGHTING GRILL BURNERS (U-burner or Sear Burner)
1. Read Use & Care Manual before lighting. Open lid during lighting. Stand as far away as possible when
lighting.
2. Push & hold selected knob for 5 seconds, then turn to “HIGH”. Burner should light. Once lit, adjust
flame as needed.
3. If burner does not light in 5 seconds, turn knob to “OFF” and wait 5 minutes before re-lighting.
4. If burner fails to light, see USE & CARE MANUAL for match lighting instructions.
LIGHTING ROTISSERIE BURNER
1. Push & hold the knob for 5 seconds, then turn to the “HIGH”. Continue to hold in the knob for at least
30 seconds after lighting. Rotisserie burner should stay lit and begin to glow. Release the knob, burner
should stay on.
2. If burner does not stay lit, turn knob to “OFF” and wait 5 minutes before re-lighting.
3. If burner fails to light, see USE & CARE MANUAL for match lighting instructions.
MATCH LIGHTING INSTRUCTIONS
If a burner will not light after several attempts, it
can be lit with a match. Open the hood and allow 5
minutes for any accumulated gas to dissipate from
the grill. Use a long-stem fireplace match, or attach
a short match to the match lighting clip provided
with your Aspire Grill (see Fig. 7).
When attempting to light a burner with a match,
be sure you selected the correct control knob for
that burner. Keep your face away as far as possible,
and pass the lit match through the openings of the
cooking grates and radiant trays and position near the burner ports. Push and turn the control knob to
“HIGH” until the burner lights. Repeat this procedure for each burner if necessary. If the burner does not
light in 5 seconds, turn the control knob to “OFF” and wait 5 minutes before trying again. If the burner
will not light after several attempts, see the TROUBLESHOOTING section of this manual.
In sunny locations, infrared Rotisserie and Sear Burners may be difficult to see if they are lit. After
attempting to light, you can very carefully wave your hand 8-10 inches (20-25 cm) away from the burner
surface to feel the heat of the burner. If there is no heat, OR IF YOU SMELL GAS, shut off the control
knob and wait 5 minutes before attempting to re-light.
Your Aspire Grill is a powerful and versatile cooking tool. Traditional grilling requires high heat for
searing and proper browning. Many meats are initially cooked on “HIGH” to sear / brown the meat
and lock in juices. After that, the temperature can be lowered to complete the cooking, such as with
large pieces of meat or poultry. This method will cook the food through without burning the outside.
Traditional barbecuing (foods cooked for a long time at low heat) is also possible with your Aspire Grill. As
with any new tool, it will take a little practice to get to know your new grill, how hot it runs, cooking times
for your favorite foods, etc. DO NOT leave the grill unattended while cooking.
LIGHTING INSTRUCTIONS
(continued)
Figure 7
Loading ...
Loading ...
Loading ...