ION90 User Manual

Loading ...

SLEEP MODE

When set to SLEEP,theIONMAXHumidierION90LCDbecomesdimmerwiththerelativehumidity

set at 60%. It will operate continuously for 8 hours with WARM on before powering off automatically.

WATER SHORTAGE INDICATOR

TheIONMAXHumidierION90comeswithaninbuiltwatershortagesensorthatwillinformyouwhen

the water level is low. The unit will beep 5 times and the will blink continuously to alert you of the

status.ThisisusefulinremindingtheusertorelltheWater Tank.

DEMINERALIZATION FILTER

When water goes through the Demineralization Filter, it is restructured at an ionic level and the dissolved

mineral salts and other additives are removed, thereby softening the water. This aids in reducing mineral

buildupatthenebulizerandnerultrasonichumidication.

USING THE IONMAX HUMIDIFIER

Ensure that the power cord is removed from the power supply at all times during installation,

relling of water, maintenance and transportation.

OPERATING NOTICE

Remove the unit from all packaging. Check and ensure

thattherearenoforeignobjectsinsidetheWater Tank and

Water Reservoir.

Remove the Water Tankfromthebaseandllitwithclean,

tepid or cool water from the tap. NOTE: DO NOT use water

above 40°C.

Empty water from base.

Fasten the cap of the Water Tank snugly and place it back

onto the Humidier Base. Please note that whenever a

lledWater Tank is placed onto the Humidier Base, the

sound of gurgling water is normal. This happens when water

is travelling from the Water Tank into the Water Reservoir.

WaitforawhileforthewatertolluptheWater Reservoir.

Step 1:

Step 2:

Step 3:

Step 4:

Loading ...

User Manual - Page 9