Loading ...
Loading ...
Loading ...
14
EN
6 Update software
To get the best features and support, update
your product with the latest software.
Check software version
1
In any source mode, on the remote
control, within three seconds press
once
then AUX twice.
» On the display panel, the current
software version is displayed.
Update software via USB
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2 Download the software into a USB storage
device.
a Unzip the download if zipped, and
make sure that the unzipped le is
named "XS1.bin".
b Put the "XS1.bin" le in the root
directory.
3 Connect the USB storage device to the
(USB) connector on this product.
4 Switch this product to HDMI ARC source
(press HDMI ARC).
5 On the remote control, within six seconds,
press
twice then Volume + once, and
then hold down MOVIE.
» On the display panel, "UPG" (upgrade)
blinks slowly, then blinks quickly.
6 When "UPG" (upgrade) blinks quickly,
press
to start the upgrade.
» Then "UPG" (upgrade) is displayed on
the display panel.
7 Wait until the upgrade is completed.
» If the upgrade is complete, this product
automatically turns off and on again.
Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this product.
Note
•
The upgrade time may take around 5 minutes.
XS1_12_UM_V4.0.indb 14 4/27/2015 5:18:06 PM
Loading ...
Loading ...
Loading ...