Loading ...
Loading ...
Loading ...
Recommended Tools
Wire Ties and Electrical Tape
Round Cable Stripper
needed when using 14/4 direct burial wire
Speaker Wire Connection
Connecting the speakers using 14/4 direct burial
speaker wire.
1. Pull the 14/4 wire on the spool to the furthest speaker location.
Leave the wire attached to the spool until the last speaker has
been connected.
2. Starting at the rst speaker and every speaker that follows,
create a loop of wire approximately 6” in length.
3. Use the round cable stripper to remove the outside protective
wire jacket to expose the 4 individual color-coded wires. If you
are unfamiliar with using a round cable stripper, please go to
YouTube and search for videos on ‘Using a Round Cable
Stripper’. Or visit the specic brand of cable stripper’s company
website for detailed instructions.
4
4. Use a wire tie to keep the wire loop intact and act as a
strain relief.
PLEASE NOTE: REGARDING THE 4 COLORED WIRES, THE RED (+) AND
BLACK (-) ARE USED FOR THE RIGHT CHANNEL, WHITE (+) AND GREEN
(-) FOR THE LEFT CHANNEL.
Wire Stripper
accommodates up to a 12 gauge wire
5. Cutting the wires. In this example, we want the rst speaker to
be connected to the right channel so we cut the red (+) and
black (-) wires only. Leave the white and green wires intact.
Loading ...
Loading ...
Loading ...