Loading ...
Loading ...
Loading ...
Black plate (180,1)
北米Model "A1920BE-B" EDITED: 2006/ 9/ 19
5-18 Audio
disc number indicator associated with the
disc you have selected will blink, and the
disc will be ejected. To remove more discs
in succession, repeat Steps 1 and 2. If you
press the eject button after turning OFF
the ignition switch, only one disc will be
ejected.
! Ejecting all discs from the player (All
disc ejection mode)
1. If you continue to press the eject
button (8) for more than 2 seconds, the
player will enter the all disc ejection mode.
2. Remove the disc tha t has been
ejected, the display indicates “CD ALL
EJECT” (when the ignition switch is in the
“Acc” or “ON” position) and disc indicator
will blink. The other discs loaded will then
be ejected one after another. If you do not
remove the ejected disc within 15 sec-
onds, the “All disc ejection mode” will be
canceled.
NOTE
Avoid driving the vehicle with a CD
sticking out, because vibration might
make it fall out.
CAUTION
Do not attempt to insert two or more
discs into the slot at a time. Doing
so can cause mechanical damage to
the CD changer.
! Title display selection
If you briefly press the “DISP” button (16)
during playback, the indication will change
to the next one in the following sequence.
. For MP3/WMA:
. For Satellite radio:
The display mode that you selected will
not be changed until you select the display
mode again.
When you depress the “DISP” button for
more than 2 seconds, the title will be
scrolled so you can see all of it. You will
see 12 characters at a time.
. The page scroll mode will be can-
celed if you perform any of the follow-
ing steps:
. When you do not operate any button
within 10 seconds.
. Press any button to select another
play mode.
. Press the eject button.
. Press the disc selection button.
. Select the radio mode.
. Press the “
” or “ ” button.
. Turn off the power of the audio
equipment.
. Turn the ignition switch to the “OFF”
position.
NOTE
When the disc has no title, the display
indicates “NO TITLE”.
! When the following messages are
displayed
If one of the following messages is
displayed while operating the CD player,
determine the cause based on the follow-
ing information. If you cannot clear those
messages, please contact your SUBARU
dealer.
! When “PUSH EJECT” is displayed
This message means that there is a
mechanical error. Depress the eject button
to unload the disc. Check the disc for
damage or deformation, and also check
that the correct disc is inserted. Do not try
to unload the disc forcibly. 8 cm/3 inch
CDs are not supported, and if inserted,
they will be immediately ejected and this
Loading ...
Loading ...
Loading ...