Loading ...
Loading ...
Loading ...
4
In order to inspect the drainage pump,
remove the coloured stop on the right
in the bottom drain.
5
Turn the pump wheel located behind
the drainage pump stop by hand.
Carefully remove any items.
6
Replace the drainage pump stop along
with the fine and coarse filters.
7
Plug the machine in again.
If the dishwasher still does not start and
a whirring sound is heard, the overflow
protection has been activated.
•
Shut off the water.
•
Remove the plug from the wall
socket.
•
Call the service department.
Drainage pump stop
NOTE!
Do not forget to replace the drainage
pump stop.
Unblocking the inlet hose filter
If the water supply contains small
particles, the outer filter on the inlet hose
may become blocked, which results in
Water inlet fault.
1
Turn off the machine using the main
power switch and unplug it from the
wall socket.
2
Turn off the water tap.
3
Unscrew the inlet hose.
4
Carefully remove the outer filter from
the inlet hose and clean it.
5
Replace the filter and check that the
gasket is correctly positioned.
6
Screw the inlet hose firmly into place.
7
Plug the machine into the wall socket
and turn on the water tap. Allow the
pressure to settle for a while and check
that the connection is watertight.
Outer filter on inlet
hose
Gasket
16
Loading ...
Loading ...
Loading ...